4,250 views 0 comments

Compliant Surface Samples

Well, I recieved a couple samples of possible compliant surface silicone sheets. Unfrotunatley after some testing, I’ve found they won’t work for FTIR use.The first is from www.rubbercal.com. The durometer (hardness) of the sample is just too high (probably around 70) and therefore doesn’t stick to the acrylic at all. The other sample I recieved is from Rubber House on ebay. This sample is just too thick (1/16″), although it may be a great alternative if the supplier ever gets 1/32″ or thinner sheets in stock.

Since these samples did not “do the trick” and other mentioned brands posted on nuigroup.com aren’t ideal, I’ve decided to go ahead and order Smooth-On Sorta Clear 40 since it has been recommended on

5,005 views 1 comments

FTIR or DI, my final multitouch decision…

After spending a large amount of time focusing on Diffused Illumination ( Rear DI), I’ve switched my concentration back to FTIR. I had great results with DI and was happy with the ease of use and setup, but one issue I had was the constant calibration I would have to go through every time I tested. This most likely had to do with an incomplete setup and open box where the IR light, shinning at the acrylic, would easily change as the environment changed. Although with some fixing it is possible to have a great DI setup, I’ve chosen to go with FTIR.

There are a couple main reasons for this decision:

10,174 views 4 comments

FTIR and DI. How they work and what they mean for multitouch.

FTIR and DI are the two main technologies used in NUIGroup (I will be posting information on alternative techniques at another time):

FTIR = Frustrated Total Internal Reflection (a phenomenon) – This is currently the most popular method, possibly due to the wide internet distribution of Jeff Han’s videos. IR light is shined into the side of an acrylic panel (most often by shinning IR LEDs on the sides of the acrylic). This light is trapped inside the acrylic by internal reflection. When a finger touches the acrylic surface this light is “frustrated” causing the light to scatter downwards where it is picked up by a IR camera.

5,318 views 4 comments

Initial Multitouch Budget

The following is the initial budget for this project. Like most projects, the budget will often change or expand beyond what was originally intended. As developments change or new items are purchased, I will update the budget to reflect any changes made.

23,310 views 23 comments

Initial Multitouch Aesthetic Plans

My aim is to create a clean and simple table design. I don’t want the table aesthetics to outweigh or detract from the musical interface and interaction. I did a quick sketch of my initial Aesthetic thoughts using Google SketchUp. I will include pictures of the actual progress and SketchUp files once the building process begins. The following design is not set in stone, but will be the basis as I start the building.

top_bottom

top_bottom_together

3,906 views 0 comments

Initial Multitouch Build Timeline

This is the initial timeline for the AudioTouch project. As I make progress, it is possible that things may move away from the timeline, but I will be doing my best to keep things as close to the timeline as possible. Since this project requires two main parts, hardware and software, I will be starting with the hardware end since this is what needs to be stable in order to develop working software. I started designing a proof-of-concept musical application already, but will rewrite it in time for week 5. Further software progress really won’t start until the table design is relatively finished (by week 8).

4,798 views 4 comments

Initial Project Proposal

3,039 views 0 comments

11 Ways to Quit Your Way to the Top

Have you ever been told quitters never win? Here’s 11 ways to quit your way to the top.

Quitters can win and do all the time. You just need to choose what to quit and what to pursue.

-->